Optional accessories

Table (optional)

CAUTION! Risk of personal injury. Unmount the table and stow it away before take-off. Do not use the table while foiling.

To mount the table:

  1. Insert the table legs into the quick locks on the deck by pushing down and rotating clockwise.
  2. Align the tabletop’s quick locks with the holes in the legs.
  3. To secure the tabletop, lift and rotate the latches on the quick locks.

To unmount the table, perform the steps in reverse order. Store the parts inside the sunbed hatch.

To maintain the table:

NOTICE! Only use silicone grease. Do not use abrasive cleaning products.

  1. Rinse the quick locks with fresh water weekly.
  2. Every 6 months, apply silicone grease to the moving parts of the quick locks.

Sunshade DC (optional)

To assemble the sunshade:

  1. Connect 4 poles to the rings on the sunshade canvas.
  2. Insert the poles into the 4 sockets near the windshield to extend the sunshade.

Sunshade HT/TT (optional)

To assemble the sunshade:

  1. Attach the 2 adjustable straps on the sunshade canvas to the 2 band brackets on the hard top or t-top.
  2. Attach the 2 poles to the rings on the sunshade canvas.
  3. Insert the poles into the 2 sockets in the rear to extend the sunshade.

Aft wall HT & (optional)

To assemble the aft wall:

  1. Slide the canvas pieces into the rails on the hard top.
  2. Secure the 6 canvas snaps.
  3. Attach the 3 adjustable straps on the sunshade canvas to the band brackets on the sunbed.

Harbor cover DC/TT (optional)

To install the harbor cover:

  1. Slide the harbor cover over the windshield.
  2. Attach the 4 adjustable straps on the sunshade canvas to the band brackets on the rear deck.

Sunbed cover HT (optional)

To install the sunbed cover:

  1. Slide the sunbed cover over the sunbed.
  2. Secure the 10 canvas snaps.