Lifting
A. 100mm (3.9in)
B. 400mm (15.7in)
C. 300mm (11.8in)
D. 700mm (27.6in)
WARNING!
Risk of personal injury.
- Do not stand under the boat during lifting.
- Empty the keel before lifting. Excess water in the keel can affect the center of gravity and mass of the boat, causing the boat to tilt.
- Be careful when handling the lines, lifting slings, and winch.
Lifting requirements
- Ensure that the mass of the boat during lifting does not exceed the stated mass of the boat.
- Ensure that the lifting company is fully insured.
- Ensure that the lifting equipment is suitable for the boat and its mass.
- Ensure that the winch strength meets the requirements of the boat.
Preparing for lifting
- Empty the keel, using the bilge pumps.
- Apply Harbor mode.
- Turn off the key.
- Secure loose items.
Positioning the lifting slings
NOTICE!
Risk of property damage.
- Never position the lifting sling beyond the keel edge or under the pod. This will seriously damage the boat.
- Be careful not to damage the pod, the front foil, or the hull.
- Position the lifting slings according to the image.
Aft: 100–400 mm from the keel edge.
Front: 300–700 mm in front of the foil garage. - Before lifting, ensure that the boat is firmly positioned and that the hull is protected.
- Lift the boat into position.